Item # |
Description |
Price |
Click for more detail...
50210 |
50210 - Spray Booth w/Fan
Durable metal spray booth with exhaust fan and external exhaust adapter. Receptacle for light (light not included).The new Spray Booth is specifically designed to reduce the mess and hazards often associated with spraying paint in a confined area. The powered fan system effectively collects overspray and is configured to easily vent vapors outside the work area. A 3-stage filter system includes an easy-to-replace prefilter. A polyester mid-filter and poly-carb filter complete the filtering system. The spray hood has a clear window area with mounting brackets for a light (light not included). Any modeler using aerosol spray paints or an airbrush should use the Spray Booth in his or her work area.
Features a 15" x 20" (38 x 51 cm) work surface accommodates flat or 3-D objects up to 13" x 18"
Replaceable three-stage filter design
Replaceable spray guard hood
Combines low cost with high efficiency
Airflow: 185 CFM
Weight: 17 lbs.
Width: 20"
Depth: 15"
Height: 18"
Electrical: 115 V, 15-watts
Retails for $641.99 |
|
 |
Click for more detail...
PreLim65 |
Pre Lim 65ml
Pre-lim is widely used in the professional restoration of arms and armour, sculpture, brass and copper exhibition cookware, ceramics and automobile paintwork. A slightly abrasive cleaner which does not scratch. It removes stubborn stains, oxidized grease/grime or mild corrosion from all solid surfaces (paint-work, plastics, polished metals, etc.). Widely used for professional cleaning of weaponry and armor, and ideal for exterior automotive surfaces.
The formulation is based on blended Neuburg silica chalks in a water/white spirit emulsion. In normal use the product is not a health hazard.
Pre-lim's cleaning/burnishing action is achieved with extremely fine control using a soft rag and light pressure. After a few minutes of air-drying, the residual chalky deposit is easily rubbed away with a clean rag, leaving surfaces dry and silk-smooth. To ensure that cleaned surfaces, especially metals, remain clean and bright, protect them with our glass-clear Renaissance micro-crystalline wax polish for a long-lasting and visually-enhancing finish.
65ml (2.25 oz) Tin |
|
|
Click for more detail...
RenWax65 |
Renaissance Wax - 65 ml
A consortium of international conservationists directed a scientist from the British Museum to conduct intensive research and find the "perfect wax." When he could not find any that met their exacting standards, he created a new wax in his laboratory. The revolutionary formula he invented is a semi-synthetic micro-crystalline fossil-origin wax entirely free of, damaging acids. It remains chemically neutral and is therefore completely safe, even on vulnerable surfaces.
The British Museum approved manufacture of this wax for its own use and for distribution to the public. That "perfect wax" is now available internationally under the name RENAISSANCE WAX.
RESTORES AND ENHANCES
Revitalize and return your objects to pristine condition. RENAISSANCE WAX buffs easily to a hard, transparent finish that will not discolor; Renews fading colors and "tired finishes;" retains matte finish when unpolished; buffs to a high gloss; reduces shine of new picture varnish.
POLISHES AND PROTECTS
Guard your precious pieces against the damaging effects of humidity, heat, dust, environmental destruction, aging, and ordinary wear. RENAISSANCE WAX provides a barrier against fingerprints and the devastation of water, wine, alcohol and other spills. With its high moisture resistance, it forms a durable, lustrous protective coating. Prevents tarnish, corrosion and "bloom;" remains completely waterproof; retards weathering on exteriors and objects exposed to climatic abrasion.
Renaissance Wax has an indefinite shelf life.
65ml (2.25 oz) Tin
|
|
|
Click for more detail...
Mgsclp1BL |
Magic Sculpt - 1 LB - Black
Magic Sculp is a 2-part epoxy putty that has been recently improved. Magic Sculp is softer than other epoxy putties and was specifically designed to meet the needs of modelers, crafters and sculptors. Its grain structure is finer than any other product available and will not shrink or crack even when formed in large structures. It can be shaped by hand or with modeling tools, sanded, carved, painted; you can attack it with a grinding tool and the cured material will not break apart or lose its shape.
Magic Sculp lies down easily and has a long window time of moldability, it smoothes out with water, in some cases there is no sanding needed; to reach those hard to get areas; just wet your paint brush and smooth over for a perfect finish.
Magic Sculp will fully cure in 24 hours at 70 degrees F. In a hot box, time will be cut in half for every 18 degrees above 70 degrees F.
Magic Sculp can be pressed into Knead-A-Mold to recreate designs and textures.
Magic Sculp is used for hard and soft carving, for making all sorts of prototypes in the toy industry, the movie industry (Disney used it for an animated cartoon motion picture), doll makers, museums and it now becoming widely used in the restoration business. Martha Stewart, not too long ago had a program on demonstrating how to make tree ornaments using cookie cutters. |
|
|
Click for more detail...
MgSclp1BR |
Magic Sculpt - 1 LB - Brown
Magic Sculp is a 2-part epoxy putty that has been recently improved. Magic Sculp is softer than other epoxy putties and was specifically designed to meet the needs of modelers, crafters and sculptors. Its grain structure is finer than any other product available and will not shrink or crack even when formed in large structures. It can be shaped by hand or with modeling tools, sanded, carved, painted; you can attack it with a grinding tool and the cured material will not break apart or lose its shape.
Magic Sculp lies down easily and has a long window time of moldability, it smoothes out with water, in some cases there is no sanding needed; to reach those hard to get areas; just wet your paint brush and smooth over for a perfect finish.
Magic Sculp will fully cure in 24 hours at 70 degrees F. In a hot box, time will be cut in half for every 18 degrees above 70 degrees F.
Magic Sculp can be pressed into Knead-A-Mold to recreate designs and textures.
Magic Sculp is used for hard and soft carving, for making all sorts of prototypes in the toy industry, the movie industry (Disney used it for an animated cartoon motion picture), doll makers, museums and it now becoming widely used in the restoration business. Martha Stewart, not too long ago had a program on demonstrating how to make tree ornaments using cookie cutters. |
|
|
Click for more detail...
MgSclp1F |
Magic Sculpt - 1 LB - Flesh
Magic Sculp is a 2-part epoxy putty that has been recently improved. Magic Sculp is softer than other epoxy putties and was specifically designed to meet the needs of modelers, crafters and sculptors. Its grain structure is finer than any other product available and will not shrink or crack even when formed in large structures. It can be shaped by hand or with modeling tools, sanded, carved, painted; you can attack it with a grinding tool and the cured material will not break apart or lose its shape.
Magic Sculp lies down easily and has a long window time of moldability, it smoothes out with water, in some cases there is no sanding needed; to reach those hard to get areas; just wet your paint brush and smooth over for a perfect finish.
Magic Sculp will fully cure in 24 hours at 70 degrees F. In a hot box, time will be cut in half for every 18 degrees above 70 degrees F.
Magic Sculp can be pressed into Knead-A-Mold to recreate designs and textures.
Magic Sculp is used for hard and soft carving, for making all sorts of prototypes in the toy industry, the movie industry (Disney used it for an animated cartoon motion picture), doll makers, museums and it now becoming widely used in the restoration business. Martha Stewart, not too long ago had a program on demonstrating how to make tree ornaments using cookie cutters. |
|
|
Click for more detail...
MgSm_20 |
Magic Smooth - 20# Kit
Magic Smooth is similar to Magic Sculp; however it is much more lower in viscosity than a putty. Magic Smooth has a consistency of a thick honey, which allows you to fill-in curved areas without it flowing out of your working area. It spreads like a creamy peanut butter and is easier to work into cracks and smaller chipped areas where you may feel that the Magic Sculp is too dense for.
Also, works great for attaching signs to boards.
Non-returnable
20 lb kit. (1 Bucket Part A & 1 Bucket Part B)
PHOTO PENDING
|
|
|
Click for more detail...
MgSm100 |
Magic Smooth 100#
Magic Smooth is similar to Magic Sculp; however it is much more lower in viscosity than a putty. Magic Smooth has a consistency of a thick honey, which allows you to fill-in curved areas without it flowing out of your working area. It spreads like a creamy peanut butter and is easier to work into cracks and smaller chipped areas where you may feel that the Magic Sculp is too dense for.
Also, works great for attaching signs to boards.
Non-returnable
100 lb kit. (1 Bucket Part A & 1 Bucket Part B)
PHOTO PENDING |
|
|
Click for more detail...
UHU1655 |
UHU Plus Endfest 300 - 1.655 Kg size
This is a 2-component epoxy adhesive for heavy-duty applications. The bond strength can be increased by curing at a higher temperature. It will set with a very hard surface finish, with high resistance to impact, ageing and moisture.
Materials:
Metals, glass, porcelain, ceramic, wood, marble, stone, concrete, Duroplast®, glass fiber reinforced synthetics, rigid PVC, rubber, rigid foam plastics such as Styropor®. Not suitable for sticking large areas of glass.
Open time:
2 hours at room temperature.
Picture pending
1.655 Kg set (915gm Resin + 740gm Hardener) |
|
|
Click for more detail...
UHU9 |
UHU Plus Endfest 300 - 9 Kg size
This is a 2-component epoxy adhesive for heavy-duty applications. The bond strength can be increased by curing at a higher temperature. It will set with a very hard surface finish, with high resistance to impact, ageing and moisture.
Materials:
Metals, glass, porcelain, ceramic, wood, marble, stone, concrete, Duroplast®, glass fiber reinforced synthetics, rigid PVC, rubber, rigid foam plastics such as Styropor®. Not suitable for sticking large areas of glass.
Open time:
2 hours at room temperature.
Picture pending
9 Kg set (5Kg Resin + 4Kg Hardener) |
|
|
Click for more detail...
PumStn |
Pumice Stone
This is the Tear Drop shaped pumice stone that comes in our kits. It is softer than Granite on Mohs scale which makes it ideal for cleaning granite and other hard stone without scratching it.
NOT TO BE USED ON MARBLE as marble is softer than pumice. |
|
|
Click for more detail...
CR16 |
Casting Resin - 16 oz
Our casting resins are two-part liquid urethane casting systems designed for use by sculptors, wood carvers, pattern makers, taxidermists, hobbyists, proto-typers, model makers, special effects professionals, doll makers, jewelers, restorers, to name a few.
A wide a variety of fillers can be incorporated into our casting resins such as, metal powders, micas, pigments, non-water based dyes, marble dust (calcium carbonate), micro balloons, and solid glass spheres.
16 oz. Kit |
|
|
Click for more detail...
TitDiox1 |
Titanium Dioxide
Titanium dioxide pigment is a fine white powder. When used in paints, plastics or paper, it provides for maximum whiteness and opacity. It gives paint high hiding power, meaning the ability to mask or hide a substrate. It does this more effectively than any other white pigment. Today, titanium dioxide pigment is by far the most important material used by the paints and plastics industry for whiteness and opacity. These unique properties are derived from the refractive index of titanium dioxide. The refractive index expresses the ability to bend and scatter light. Titanium dioxide has the highest refractive index of any material known to man, greater even than diamond.
1 Pound |
|
|
Click for more detail...
MonojectSyringe-12 |
Monoject Syringe
One-piece syringe used for the controlled dispensing of ColdGlaze, epoxy and other resins. The curved tip makes dispensing liquids easier.
Monoject syringe holds 12 ml.
Each pack contains two (2) syringes. |
|
|
Click for more detail...
UVStand-1239209505 |
UV Light Stand
Free up your hand by using the above UV Light with this Stand.
This gives you the freedom to either hold your item with both hands for optimal exposure to set and then leave it under the light for maximun cure while not exposing your hands to prolonged UV light, or to set up your project and then turn the light on.
NOTE: Picture is the Lamp Stand holding Lamp (which is sold seperately). |
|
|
Click for more detail...
UHUPlusGrnSyrg |
UHU Plus Endfest 300 - 53 gm size Cartridge
This is a 2-component epoxy adhesive for heavy-duty applications. The bond strength can be increased by curing at a higher temperature. It will set with a very hard surface finish, with high resistance to impact, ageing and moisture.
Materials:
Metals, glass, porcelain, ceramic, wood, marble, stone, concrete, Duroplast®, glass fiber reinforced synthetics, rigid PVC, rubber, rigid foam plastics such as Styropor®. Not suitable for sticking large areas of glass.
Open time:
2 hours at room temperature.
Setting:
The setting time depends on the temperature; final strength can be increased by applying heat (not over 200°C - see table).
Temperature Setting time Strength
20 °C 12 Std. 1200 N/cm2
40 °C 3 Std. 1800 N/cm2
70 °C 45 Min. 2000 N/cm2
100 °C 10 Min. 2500 N/cm2
180 °C 5 Min. 3000 N/cm2
Very popular in Europe.
Syringe fits standard size application guns.
50ml/53gm pack
|
|
|
Click for more detail...
MgSclp100c |
Magic Sculp 100 - Colored
Magic Sculp is a 2-part epoxy putty that has been recently improved. Magic Sculp is softer than other epoxy putties and was specifically designed to meet the needs of modelers, crafters and sculptors. Its grain structure is finer than any other product available and will not shrink or crack even when formed in large structures. It can be shaped by hand or with modeling tools, sanded, carved, painted; you can attack it with a grinding tool and the cured material will not break apart or lose its shape.
Magic Sculp lies down easily and has a long window time of moldability, it smoothes out with water, in some cases there is no sanding needed; to reach those hard to get areas; just wet your paint brush and smooth over for a perfect finish.
Magic Sculp will fully cure in 24 hours at 70 degrees F. In a hot box, time will be cut in half for every 18 degrees above 70 degrees F.
Magic Sculp can be pressed into Knead-A-Mold to recreate designs and textures.
Magic Sculp is used for hard and soft carving, for making all sorts of prototypes in the toy industry, the movie industry (Disney used it for an animated cartoon motion picture), doll makers, museums and it now becoming widely used in the restoration business. Martha Stewart, not too long ago had a program on demonstrating how to make tree ornaments using cookie cutters.
Colors available:
Black, Brown, Green, Flesh, White.
Just mention the color you need in the comments section when you check out.
|
|
|
Click for more detail...
MgSclp100 |
Magic Sculp - 100 LB.
Magic Sculp is a 2-part epoxy putty that has been recently improved. Magic Sculp is softer than other epoxy putties and was specifically designed to meet the needs of modelers, crafters and sculptors. Its grain structure is finer than any other product available and will not shrink or crack even when formed in large structures. It can be shaped by hand or with modeling tools, sanded, carved, painted; you can attack it with a grinding tool and the cured material will not break apart or lose its shape.
Magic Sculp lies down easily and has a long window time of moldability, it smoothes out with water, in some cases there is no sanding needed; to reach those hard to get areas; just wet your paint brush and smooth over for a perfect finish.
Magic Sculp will fully cure in 24 hours at 70 degrees F. In a hot box, time will be cut in half for every 18 degrees above 70 degrees F.
Magic Sculp can be pressed into Knead-A-Mold to recreate designs and textures.
Magic Sculp is used for hard and soft carving, for making all sorts of prototypes in the toy industry, the movie industry (Disney used it for an animated cartoon motion picture), doll makers, museums and it now becoming widely used in the restoration business. Martha Stewart, not too long ago had a program on demonstrating how to make tree ornaments using cookie cutters.
This is the uncolored version.
Colors available upon request (see below).
Black, Brown, Green, Flesh, White.
|
|
|
Click for more detail...
Rustins |
Rustins
Rustins is no longer being manufactured and is replaced by ColdGlaze. |
|
|
Click for more detail...
Chintex |
Chintex
Chintex is no longer being manufactured and is replaced by ChinaGlaze. |
|
|
