Item # |
Description |
Price |
Click for more detail...
HVCA
|
High viscosity cyanoacrylate (CA)
High viscosity grade cyanoacrylate can be used as a fast setting, hard filler. On porous surfaces, use the activator to prevent the adhesive from penetrating into the surface and to aid cure. Apply the Activator to the surfaces and allow to dry, then apply the adhesive.
20 gm bottle
|
|
 |
Click for more detail...
MVCA
|
Medium viscosity cyanoacrylate (CA)
Medium viscosity grade cyanoacrylate is the most popular version of CA for restorers. For general use - can be used for sticking plastics, metal, porcelain, fine china, ceramics, jewelry and model making.
20 gm bottle
|
|
|
Click for more detail...
LVCA
|
Low viscosity cyanoacrylate (CA)
Low viscosity is a very thin grade of superglue used to run into joints after parts have been assembled, also for running into cracks.
20 gm bottle
|
|
|
Click for more detail...
ActCA
|
CA Activator
Activator can be used with any of the superglues. It will speed the cure time, especially through volume, and help to bond porous materials such as wood, card, ceramics, leather, etc.
Apply Activator to one surface and the adhesive to the other surface and assemble. Or spray it onto the applied adhesive. The Activator comes with a brush and spray head.
See Activator Refill below.
50 ml applicator bottle
|
|
|
Click for more detail...
DBCA
|
CA DeBonder
DeBonder comes complete with brush in the lid. DeBonder will soften and break down superglue joints. Applied to superglue, it will turn it into a jelly-like substance, which can be easily wiped away with a tissue. It can be used to remove superglue from fingers, clean up spills, break down bonded joints and remove cured surplus glue.
DO NOT USE ON THE FACE.
Wash skin thoroughly after use.
50 ml applicator bottle
|
|
|
Click for more detail...
CANZ
|
CA Nozzles - Extra Fine
These nozzles will fit the 20 gram CA bottles. They are reusable and can be cut back when the end becomes blocked. These very fine polythene nozzles allow total control, allowing beads as fine as .05mm to be applied, giving a cleaner, finer bond line with less clean-up as well as LESS WASTE OF ADHESIVE.
4 pack
|
|
|
ActCA5
|
Cyanoacrylate Activator Refill - 500 ml
This is the equivalent of 10 refills for the Cyanoacrylate Activator application bottle.
This can DOES NOT have any application methods such as a brush or spray nozzle. However, it is cheaper to refill your current bottle rather than purchasing a new one.
500 ml can
|
|
|
